Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and Z directions Degree of

and Z directions Degree of protection IEC 60529 IP67

*Input for setup mode (optional) This mode allows the machine to be cycled during setup and troubleshooting while maintaining the current downtime reason and without incrementing the parts count

and provides it to ShopFloorConnect

self-powered

The receiver only needs to detect a very small amount of light from the emitter for the sensor to actuate

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and Z directions Degree ofWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,